Ebode IPV68P2P User Manual page 57

Setting IO alarm
On the IO page, Enable the I/O alarm, select the "Send E-mail"and "Snapshot" before
you have configured the mail and FTP.
If an IO alarm is triggered and IO alarm output device will always alarm (sound alarm is
issued a warning sound, alarm lights in flash etc.). Click "Clear IO alarm output" , the
alarm output device will stop alarming. If IO alarm is triggered again after alarm
interval, IO alarm output device will be restart.
24-9-2015
Click this button and select all time range.
Figure 10.58
Figure 10.59
57 ebode IPV68P2P