Ebode IPV68P2P User Manual page 62

Setting the Cruise Mode
There are two cruise modes: Cruise time and Cruise Loops. Cruise time: Select Cruise
time from Cruise Mode dropdown, then set the Cruise time of the camera. Cruise Loops:
Select Cruise Loops from Cruise Mode dropdown, set the Cruise Loops of the camera.
Click Save to take effect.
Manage the Cruise Track
There are two default cruise tracks: Vertical and Horizontal.
Vertical: The camera will rotate from up to down
Horizontal: The camera will rotate form left to right.
Add: Add one cruise track, then click save button.
Delete: Select one cruise track and delete it.
Save: After you modify the Dwell time, you should click Save button to take effect.
Example
How to do add cruise tracks ?
1.) Click Add button and enter a descriptive name to identify the cruise track.
2.) On the lower left of the page, you can see all preset points you have added. Select
one preset point and click Add button, you can see the preset point has been added to
the cruise track on the cruise track page. You need to add two or more preset points to
the cruise track.
1 Select one
preset point.
24-9-2015
Figure 10.70
2 Click
Add
button.
Figure 10.71
62
The new added
track name.
Here you can see
the preset point has
been added to one
track. And you can
set the stay time.
ebode IPV68P2P