Ebode IPV68P2P User Manual page 64

Add: Select one preset points and add it to the selected cruise track.
Delete: Select one preset points you have added to one cruise track, click delete.
Move up/ down: Select one cruise track, adjust the order of preset points in one cruise
track.
Attention: Considering the life time and thermal issue of the motor, it's not recommend
to do long-time cruise.
10.7.3 Start-Up Options
Here section will allow you to set the stop position after the camera reboots.
It supports three modes: Disable Start-Up, Go To Home Position and Go To Preset
Position.
Disable Start-Up: When rebooting, the camera will not pan / tilt.
Go To Home Position: When rebooting, the camera will pa Providing Central Management
Software to manage or monitor multi-cameras n / tilt and stops at center.
Go To Preset Position: Select one preset position and save it. When rebooting, the
camera will pan/ tilt and stops at the preset position you have set.
10.7.4 Guard Position Settings
After setting the guard position, your camcorder will automatically return to the guard
position within a predetermined time (manually setting) when it stops moving (manually
or cruise). You could refer to the following method:
24-9-2015
Figure 10.75
Figure 10.76
64 ebode IPV68P2P