Connecting A Mobile Device To The Scansnap Via A Wireless Access Point - Fujitsu ScanSnap ix500 Wi-Fi Connection Manual

Connecting a Mobile Device to the ScanSnap via a Wireless
Access Point
ATTENTION
To connect a mobile device to the ScanSnap via wireless LAN, you also need to configure the settings
for the computer. Set up a wireless network by following the connection method.
Preparation
l Connect a mobile device to a wireless access point that is to be used when connecting a
mobile device to the ScanSnap.
For a successful connection, the following information of the wireless access point is required:
- Network name (SSID)
- Security key (password)
l When setting up a wireless network, you need a password. The default password is the last
four digits of the ScanSnap serial number.
l To connect the ScanSnap and a mobile device, you need to install ScanSnap Connect
Application on your mobile device.
Download ScanSnap Connect Application from the following application stores:
For iOS
- iTunes
- App Store
For Android
- Google Play
Connection Method
This method assumes that ScanSnap Manager is not installed on the computer that is to be
connected to the ScanSnap. Install ScanSnap Manager from the Setup DVD-ROM and follow the
Wireless Network Setup Wizard that appears after the installation is complete.
HINT
Be careful not to close the ADF paper chute (cover) of the ScanSnap.
1.
Click the [Setup Now] button.
19
Network Connection