Specifications Of Wireless Lan - Fujitsu ScanSnap iX100 Basic Operation Manual

Specifications of Wireless LAN

The following table summarizes the wireless LAN specifications of the ScanSnap.
Model name
Observed standards
Frequency range
Channels
Transfer speed (standard)
Communication mode
Communication distance
(predicted)
Security
Easy installation
*1: The values indicated on these standards are the maximum value, and do not indicate actual
communication speed.
*2: To use the wireless function, you need a wireless access point that supports the same
standards.
*3: The specifications may vary based on the connected wireless access point and the surrounding
environment.
*4: The following EAP types are supported.
EAP-MD5, PEAPv0, EAP-TLS, EAP-TTLS, EAP-FAST, LEAP
*5: You need a wireless access point or wireless client that supports the WPS function.
iX100
IEEE802.11b/IEEE802.11g/IEEE802.11n
2.412 GHz to 2.472 GHz
Access Point Connect mode: 1 to 13 ch
Direct Connect mode: 1 to 11 ch
IEEE802.11b Max.: 11 Mbps
IEEE802.11g Max.: 54 Mbps
IEEE802.11n Max.: 72.2 Mbps (Only supports 20 MHz bandwidth) (*1)
Access Point Connect mode (infrastructure) (*2)
Direct Connect mode (access point)
Indoors, 50 m (Recommended: indoors, within 25 m) (*3)
Access Point Connect mode
WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES), WPA (TKIP/AES), WPA2
(TKIP/AES), WEP (64-bit/128-bit) (*4)
Direct Connect mode
WPA-PSK (TKIP/AES), WPA2-PSK (TKIP/AES), WEP (64-bit/128-bit)
WPS 2.0 supported (button/PIN code) (*5)
120
Specifications of Wireless LAN