Assembly Instructions - Spirit 161168395US Owner's Manual

Assembly Instructions

Pre-Assembly
Using a razor knife (Box Cutter), cut the banding straps that wrap around the car ton.
1.
Reach under the bottom edge of the car ton and pull it away from the cardboard
underneath, separating the staples that join the two together. Lift the box over the unit
and unpack.
Carefully remove all parts from car ton and inspect for any damage or missing parts. If
2.
damaged parts are found, or parts are missing, contact your dealer immediately.
Locate the hardware package. The hardware is separated into four steps. Remove the
3.
tools first. Remove the hardware for each step as needed to avoid confusion. The
numbers in the instructions that are in parenthesis (#) are the item number from the
assembly drawing for reference.
Assembly T ools
#114.Phillips Head
Screwdriver
#112.12/14mm
Wrench
Customer Service 1-888-707-1880
Email: customerservice@dyaco.ca
#113.13/15mm
Wrench
6
#115.L Allen Wrench
#130.13/14mm
Wrench
Dyaco Canada Inc. 2014