Connecting devices and
establishing
communication
Learn how to connect external devices to the projector.
Communication and input ports are located on the projector side input panel (operator side). The
image below shows the video option card slot numbers and the IMXB panel.
Video sources can be connected to either the ports on the video option cards or the HDBaseT port on
the IMXB.
IMXB ports
The IMXB has a variety of ports that can be used for control, 3D sync, upgrading, retrieving
interrogators, and connecting audio.
Port
Audio Out
HDBaseT
USB 1/USB 2
Boxer 30 Installation and Setup Manual
020-102017-01 Rev. 1 (11-2015)
Description
Not supported.
Accepts video signals, Ethernet, and IR.
Connects a USB flash drive that has been formatted with a FAT32
file system. Can be used for upgrades, backups, restores,a nd
interrogators.
30