Toshiba E-studio 210c Imaging Manual page 57

• Check areas [1] through [4] on the test page or configuration page for the following items:
• [1]: Check that the setting of the controller is correct.
• [2]: Check the date when calibration was last performed. (A PS test page shows a calibration date for
plain paper only.)
• [3]: Check that the tone of each color is correctly reproduced and the highlight is not excessively whitish.
• [4]: Check that the image is printed according to the natural color balance.
PS Test Page
[1]
[2]
[3]
PCL Test Page (GA-1121/GA-1131 Only)
[3]
3. Printer-specific Adjustments
[4]
[4]
e-STUDIO210c/310c, e-STUDIO211c/311c
3.1