Toshiba E-studio 210c Imaging Manual page 28

2. Copier-specific Adjustments
(4) Enter adjustment mode [05] and change the value for code [779 to 798] to adjust the density of each color.
Color to be
adjusted
Y
(yellow)
M
(magenta)
C
(cyan)
K
(black)
* Set the value in about 10 increments while checking the copy until the optimum value is obtained.
* The subcode varies according to the area for which the density is adjusted. Enter the code for the area to
be adjusted by referring to the table below.
Subcode
0
1
2
2.1
e-STUDIO210c/310c, e-STUDIO211c/311c
Original
[05] code
mode
Text/photo 05-779
Text 05-780
Printed image 05-781
Photo 05-782
Map 05-783
Text/photo 05-784
Text 05-785
Printed image 05-786
Photo 05-787
Map 05-788
Text/photo 05-789
Text 05-790
Printed image 05-791
Photo 05-792
Map 05-793
Text/photo 05-794
Text 05-795
Printed image 05-796
Photo 05-797
Map 05-798
Area for the density to be adjusted
Low-density area
Medium-density area
High-density area
Subcode* Value recommended
0/1/2
0/1/2
0/1/2
0/1/2
0/1/2
0/1/2
0/1/2
0/1/2
To increase the density:
0/1/2
Make it greater than 128.
0/1/2
0/1/2
To decrease the density:
0/1/2
Make it less than 128.
0/1/2
0/1/2
0/1/2
0/1/2
0/1/2
0/1/2
0/1/2
0/1/2
Default
128