Toshiba E-studio 210c Imaging Manual page 123

(2) Enter setting mode [05]. Change the value for codes [58 to 61] to change the printer screen for printing.
For e-STUDIO210c/310c
Color to be
adjusted
Y (yellow)
M (magenta)
C (cyan)
K (black)
For e-STUDIO211c/311c
Color to be
adjusted
Y (yellow)
M (magenta)
C (cyan)
K (black)
* Each pattern has the following feature. Do not make the Pattern 2 settings for the e-STUDIO210c/310c, or
degradation in image quality may occur.
• Pattern 1 (for e-STUDIO211c/311c):
To make printed black areas look smooth.
* Slightly increases black screen pitch and decreases Magenta screen pitch.
• Pattern 2:
To make printed yellow, cyan, and black areas look smooth.
* Increases yellow, cyan, and black screen pitch.
<Note> • When changing the printer screen setting, change the value for all four colors.
• Do not set a value other than the one given above, or degradation in image (moiré) may occur.
After the adjustment, use the next procedure.
(3) Enter adjustment mode [05], select code [878], and press the [START] button.
• Image quality control will be forcibly performed to correct the color balance and density on the print.
After the adjustment, use the next procedure.
[05] code Value
05-58 0
05-59 30
05-60 0
05-61 10
Value
[05] code
Pattern 1
05-58 0
05-59 30
05-60 0
05-61 10
3. Printer-specific Adjustments
Default
0
Default
Pattern 2
40
50
0
60
70
e-STUDIO210c/310c, e-STUDIO211c/311c
3.14