To Have Uniform Image Quality In Continuous Printing; (To Optimally Set The Image Quality Control Function) - Toshiba E-studio 210c Imaging Manual

1. General Adjustments – Copying and Printing

1.4 To Have Uniform Image Quality in Continuous Printing

Before the adjustment
The image quality differs in density during
continuous printing.
Explanation
When a large quantity of sheets are continuously printed, the image quality sometimes differs in density between
the first print and the last print. To obtain the same image quality throughout continuous printing, shorten the
execution interval for image quality control.
Procedures
* The service technician must perform the adjustment in accordance with the procedures below.
(1) Enter setting mode [08] and change the set value for code [407] to "1" so that image quality control will be
executed each time 300 sheets (set value for 08-453) or more are continuously printed.
Value for 08-407
0
1
After changing the set value, print and check the image quality.
If further image quality adjustments are still necessary, use the next procedure.
1.4
e-STUDIO210c/310c, e-STUDIO211c/311c

(To optimally set the image quality control function)

Execution of image quality control during continuous printing
Invalid (default)
Valid
After the adjustment
The same image quality can be obtained
during continuous printing.