Toshiba E-studio 210c Imaging Manual page 17

Cautions after the completion of the adjustment
Nothing in particular.
Remarks
• Enter the value mentioned in the procedures or one within the recommended value range for the adjustment as
much as possible. Otherwise, it may cause a loss in copier performance, including a poor image quality and a
decrease in consumable life.
• The desired image quality is sometimes not obtained depending on the type of paper. In such a case, change
the paper to the recommended one and then print or adjust the image quality.
• If printing using another type of paper causes a problem in the image quality after adjustment, once return the
transfer set value (05-356 to 360, 05-315 to 317) to the default and then readjust.
• When the image quality and density are different on the face and back of paper in duplex printing, this
adjustment will improve the image quality. Particularly, when the back is lower in density, the image quality
may be improved by increasing the set value for transfer.
• When replacing any consumable parts, refer to the relevant information in the SERVICE MANUAL and
SERVICE HANDBOOK.
1. General Adjustments – Copier and Printer
e-STUDIO210c/310c, e-STUDIO211c/311c
1.2