Toshiba E-studio 210c Imaging Manual page 4

Purpose of the Imaging Manual
The Imaging Manual is intended for customers using the Toshiba e-STUDIO210c/310c and e-STUDIO211c/311c
with a variety of specific needs and inquiries for high image quality, such as:
How to obtain a clearer copy image
How to maintain the current image quality
How to make the text look sharper on the copy
The Toshiba MFPs are factory-configured to provide image quality settings that satisfy the majority of
customers. However, these settings may not be necessarily optimal for all specific needs from customers.
Proper image quality adjustments can satisfy such needs. Most of the adjustments described in this manual must
be performed by a service technician, but a few of them can also be performed by the customer.
It is strongly recommended that this manual be fully utilized by not only the service technician, but also the sales
representative, who also has opportunities of obtaining customer feedback on the image quality. This manual
helps the sales representative to study and comprehend what kind of customer needs for the image quality can be
satisfied, to make a proposal to the customer for improving image quality, and to communicate the customers
needs with ease to the service technician. In addition, this manual is expected to facilitate the marketing of the
Toshiba MFPs to prospective customers that have specific demand for image quality and the expansion of sales.
The adjustments described in this manual are all based on the needs of actual customers. Meeting their specific
needs will increase their satisfaction.
Please remember to read "Cautions after the completion of the adjustment", which you must pay close attention
to, after the completion of the adjustment.
Precautions in Servicing
• For adjustments to be performed by the service technician, the cautions mentioned in the Service Manual must
be stringently followed. The adjustments must be performed by a qualified service technician who has
completed the service training course.
• The default values mentioned in this manual may be different from the actual ones, due to the timing of
shipping (firmware version). But note that the values recommended and acceptable value range mentioned in
this manual remain the same.