Adding Products To The Start Screen - Jura GIGA X3c Professional Instructions For Use Manual

4 Permanent settings in programming mode
Adding products to the
start screen
28
T Press the 'Product name'
The available letters, numbers and special characters appear
on the display.
T Keep pressing the
deleted.
E By pressing the
upper case letters.
g T Turn the Rotary Switch until the letter
k T Press the Rotary Switch to confirm the letter 'M'.
T Press the ' ^ '
g T Turn the Rotary Switch until the letter
k T Press the Rotary Switch to confirm the letter 'y'.
T Continue until
T Press the 'Save'
'Saved' appears briefly on the display.
'My espresso'
O T Press the P button to exit programming mode.
'Please select product:'
In the programme item
will find all the products stored as standard in your GIGA. You can
move any of these products to your preferred position on the start
screen or in the product selector and make it one of your favourites.
Example: Proceed as follows to display the product
bottom right-hand corner of the start screen.
Precondition: 'Please select product:'
O T Press the P button.
'Maintenance status (1/5)'
g T Turn the Rotary Switch until the programme item
settings (2/5)'
T Press the 'Classic-library'
'Classic-library'
E Next select the button of the product you want to move to the
start screen. No product is prepared at this point.
T Press the '2 espressi'
'2 espressi'
button.
' < ' button until all letters have been
' ^ ' button, you can switch between lower and
button to change to lower case.
'My espresso' is displayed.
button.
'Product settings (2/5)' /
is displayed.
is displayed.
button.
button.
'M' is highlighted.
'y' is highlighted.
'Classic-library' you
'2 espressi' in the
'Product