Table of Contents
Advertisement
4 Permanent settings in programming mode
Positioning products on
the start screen
Enable or disable setting
of cup volume
22
T Press the
'Coffee strength'
'Coffee'
and the coffee strength are displayed.
T Press the
' < '
or
' > '
button to change the setting for the cof-
fee strength.
T Press the
'Save'
button.
'Saved'
appears briefly on the display.
'Coffee'
T Press the
' '
button until the start screen is displayed again.
You can reposition the products on the start screen.
Example: Proceed as follows to replace
page of the start screen with 'Ristretto'.
T Press the
' Pc '
button.
T Press the
' T '
button.
'2/4'
T Press the
'Expert mode'
'Expert mode'
E Next select the button of the product you want to move. No
product is prepared at this point.
E To display more products, press the
T Press the
'Ristretto'
button.
'Ristretto'
T Press the
'Position'
button.
'Select position'
T Press the
'2x Espresso'
'Replace product?'
T Press the
'Yes'
button.
'Saved'
appears briefly on the display.
'Ristretto'
T Press the
' '
button until the start screen is displayed again.
In the programme item
'2/4'
make the following setting:
U
'Active': The function 'Permanently setting the amount of
water for the cup size' is activated. You can adjust the amount
of water to the cup size by pressing and holding the relevant
preparation button.
button.
'2x Espresso'
on the first
button.
' T '
button (bottom right).
button.
/
'Customise cup fill volume'
you can
Hide quick links:
Advertisement
Table of Contents
