Positioning Products On The Start Screen - Jura X8 Instructions For Use Manual

Positioning products on
the start screen
T Press the ' < ' or
fee strength.
T Press the 'Save'
'Saved' appears briefly on the display.
'Coffee'
T Press the '' button for around 2 seconds to exit
programming mode.
You can reposition the products on the start screen.
Example: Proceed as follows to replace
of the start screen with 'Ristretto'.
T Press the
' Pc '
T Press the ' T ' button several times until
T Press the 'Expert mode'
'Expert mode'
E Next select the button of the product you want to move. No
product is prepared at this point.
E To display more products, press the
T Press the
'Ristretto'
'Ristretto'
T Press the 'Position'
'Select position'
T Press the 'Flat White'
'Replace product?'
T Press the 'Yes'
'Saved' appears briefly on the display.
'Ristretto'
T Press the '' button for around 2 seconds to exit
programming mode.
4 Permanent settings in programming mode
' > ' button to change the setting for the cof-
button.
'Flat White'
button.
button.
' T '
button.
button.
button.
button.
on the first page
'3/5' is displayed.
button (bottom right).
25