Autoriseret dansk forhandler service@coffeetime.dk www.coffeetime.dk | Bestil tilbehør online | Leveret indenfor 24 timer The IMPRESSA X9 Win Manual Original instructions for use Before using the machine read the instructions for use. The ‘IMPR ESSA Manual’ has been awarded the seal of approval by the independent German Technical Inspection Agency, TÜV SÜD, due to its...
Table of contents Your IMPRESSA X9 Win Control elements Proper use For your safety The IMPR ESSA X9 Win Manual Symbol description ............................8 1 IMPR ESSA X9 Win A stylish performance ..........................9 J UR A on the Internet ............................1 0 2 Preparing and using for the first time Standard products ............................1 1...
Page 3
Table of contents Language ..............................29 Format (unit of water amount and time format) ..................29 S witch-on rinse ............................30 Multimedia ..............................30 6 Maintenance Maintenance tips ............................32 R insing the machine ...........................32 Dismantling and rinsing the dual spout ....................33 Milk system cleaning ..........................33 Coffee system cleaning ..........................34 Combined cleaning .............................35 Changing the filter ............................37...
Control elements Control elements Open the cover Figure: IMPR ESSA X9 Win Platinum Bean container with cover Filler funnel for cleaning tablet Cup tray Cover for programming buttons Power switch and power cable (back of Water tank with cover machine) Hot water pipe (pivoting) Dual spout (height adjustable) Steam pipe (pivoting)
Page 5
Control elements Front left Front right Display Programming buttons: Product buttons (standard products ): On/off button 1 espresso button Filter button 1 coffee button Descaling button 9 Counter button 2 coffee button Milk foam button P button Cappuccino button + button Latte macchiato button R inse button 6 Milk system cleaning button...
Important notes Proper use The machine is designed and intended for commercial use. It should only be used to prepare coffee and to heat milk and water. Use for any other purpose will be deemed improper. J UR A Elektroappa- rate AG cannot accept any responsibility for the consequences of improper use.
Page 7
Important notes A defective machine is not safe and could cause injury or fire. To avoid damage and any associated risk of injury or fire: Never allow the power cable to trail, as someone could trip over the power cable and/or it could get damaged. Protect your IMPR ESSA from environmental influences such as rain, frost and direct sunlight.
If you use the IMPR ESSA X9 Win, you will become a master at preparing exciting coffee specialities, you will be a Barista! Y ou can download the short operating instructions for your machine from the J UR A website (www.jura.com). Symbol description Warnings Always take note of any information marked with the CAUTION or WAR NING symbol.
1 IMPRESSA X9 Win 1 IMPRESSA X9 Win A stylish performance With its elegant design and highest-quality materials, this luxury machine with its cool Nordic style not only has an appealing exte- rior, but easily fulfils the most sophisticated coffee wishes of cus- tomers, guests and colleagues.
R equest our full-range brochure and con- tact an authorised dealer for advice. J URA on the Internet Visit us on the Internet. @ At www.jura.com you will find interesting and up-to-date information on your IMPR ESSA and on every aspect of coffee.
2 Preparing and using for the first time 2 Preparing and using for the first time This chapter provides you with the information you need to use your IMPR ESSA without any problems. Y ou will prepare your IMPR ESSA step-by-step for your first coffee experience.
2 Preparing and using for the first time Filling the water tank To enjoy perfect coffee, we recommend changing the water every day. CAUTION Milk, mineral water or other liquids can damage the water tank or the machine. Only fill the water tank with fresh, cold water. T R emove the cover of the water tank.
Page 13
2 Preparing and using for the first time 3 T S witch on the IMPR ESSA using the power switch on the back of the machine. T Open the cover of the programming buttons. Q T Press the on/off button to switch the IMPR ESSA on. SPR ACHE DE UTSCH appears on the display.
2 Preparing and using for the first time c T Press the rinse button to start the rinse operation. MACHINE IS R INSING, water flows out of the dual spout. The operation stops automatically. Y our IMPR ESSA is ready for operation.
Page 15
2 Preparing and using for the first time Determining the water Y ou can find out what the water hardness is by using the Aquadur® hardness test strip supplied as standard. T Hold the test strip briefly (for one second) under flowing water.
2 Preparing and using for the first time Adjusting the grinder Both grinders can be adjusted on a continuous scale to suit the roast of the respective coffee blend. CAUTION If you adjust the fineness of grind when the grinder is not in opera- tion, the setting ring could be damaged.
2 Preparing and using for the first time Switching on When the IMPR ESSA is switched on, a prompt for the rinse operation automatically appears which is initiated by pressing the rinse but- ton. This setting can be changed in programming mode so that the machine automatically activates the switch-on rinse (see Chapter 5 ‘Permanent settings in programming mode –...
3 Familiarising yourself with the control options 3 Familiarising yourself with the control options With the IMPR ESSA, you can prepare an excellent coffee or milk spe- ciality at the touch of a button. Y ou also have the option of adjusting the coffee strength and temperature, as well as the amount of water to your personal taste.
3 Familiarising yourself with the control options Permanent settings in Y ou can easily adjust your IMPR ESSA to your personal coffee blends programming mode and specialities. The permanent setting options in programming mode are shown here: Programme item Subitem Explanation T Adjust the water hardness.
3 Familiarising yourself with the control options Settings in programming mode always follow the same model. Example: Proceed as follows to change the amount of powder for an espresso. Precondition: Y our IMPR ESSA is ready for operation. T Open the cover of the programming buttons. O T Press the P button until WATER HAR DNESS 1 6°...
3 Familiarising yourself with the control options Precondition: Y our IMPR ESSA is ready for operation. T Open the cover of the programming buttons. O T Press the P button until WATER HAR DNESS appears. T Press the + or - button several times until INFOR MATION is shown.
4 Preparation at the touch of a button 4 Preparation at the touch of a button In this chapter you will find out how to prepare coffee and milk spe- cialities as well as hot water and steam without making further set- tings.
4 Preparation at the touch of a button Cappuccino, Y ou can prepare cappuccino, milky coffee and latte macchiato very milky coffee and simply at the touch of a button. latte macchiato Example: This is how to prepare one latte macchiato. Precondition: Y our IMPR ESSA is ready for operation.
4 Preparation at the touch of a button Hot water There is a danger of scalding from hot water splashes. Avoid direct contact with the skin. CAUTION Precondition: Y our IMPR ESSA is ready for operation. T Place a cup under the hot water pipe. m T Press the hot water button.
5 Permanent settings in programming mode 5 Permanent settings in programming mode Product settings With the PR ODUCT SETTINGS programme item you can select indi- vidual settings for all coffee and milk specialities as well as hot water. The following permanent settings can be made: Product Amount Additional setting options...
5 Permanent settings in programming mode T Press the + or - button several times to select the amount of powder. O T Press the P button to confirm the setting. CONFIR MED appears briefly on the display. 1 ESPR ESSO / POWDER AMOUNT 0 T Press the exit button to exit the programming item.
Page 27
5 Permanent settings in programming mode MACHINE OFF Set the required switch-off time. ON/OFF Set the weekdays on which the IMPR ESSA should switch on and off automatically. E The programmable switch-on and switch-off time can only be set when the time has been set. E The programmable switch-on only works when the machine is switched on at the power switch (standby).
5 Permanent settings in programming mode O T Press the P button to confirm the setting. CONFIR MED appears briefly on the display. ON/OFF / SUNDAY NO 0 T Press the exit button to exit the programming item. TIMER 0 T Press the exit button to exit programming mode. Y our IMPR ESSA is once more ready for operation.
5 Permanent settings in programming mode Language Y ou selected the language when the machine was used for the first time. Y ou can change this setting. Example: To change the language from ENGLISH to DE UTSCH, pro- ceed as follows. Precondition: Y our IMPR ESSA is ready for operation.
5 Permanent settings in programming mode 0 T Press the exit button to exit the programming item. FOR MAT 0 T Press the exit button to exit programming mode. Y our IMPR ESSA is once more ready for operation. Switch-on rinse Y ou can set whether the switch-on rinse must be started manually or automatically.
Page 31
5 Permanent settings in programming mode VIDE O SOUND - INTAKE VIDE O SOUND - ALER T VIDE O SOUND - INSTR UCTION E In the VIDE O PLAYBACK and VIDE O SOUND programme items, the options CONTINUOUS, NEVER and ONCE are available for playback.
6 Maintenance 6 Maintenance Maintenance tips To ensure that you get many years of reliable service out of your IMPR ESSA and to guarantee an optimum coffee quality, the machine requires daily maintenance. Proceed as follows: Empty the coffee grounds container and the drip tray. R inse them with warm water.
6 Maintenance Dismantling and For reasons of hygiene and to ensure that the dual spout works per- rinsing the dual spout fectly, it must be regularly dismantled and rinsed. Precondition: Y our IMPR ESSA is switched off (standby). T Press the release button on the top of the dual spout and remove the cover.
6 Maintenance Precondition: Y our IMPR ESSA is ready for operation. T Open the cover of the programming buttons. 6 T Press the milk system cleaning button. The current maintenance status is shown. 6 T Press the milk system cleaning button again. STAR T MILK SYSTEM CLEANING 6 T Press the milk system cleaning button to start the cleaning operation.
6 Maintenance E J UR A cleaning tablets are available from stockists. Precondition: Y our IMPR ESSA is ready for operation, the message R is shown on the display. T Open the cover of the programming buttons. 7 T Press the coffee system cleaning button. The current maintenance status is shown.
Page 36
6 Maintenance If the wrong cleaning agent is used, the machine could be damaged CAUTION and/or traces of detergent could be left behind in the water. Only use original J UR A care products. E The cleaning programme only lasts about 22 minutes. E Do not interrupt the cleaning programme.
6 Maintenance T Insert a J UR A cleaning tablet into the filler funnel for the cleaning tablet. 8 T Press the coffee system cleaning button. MACHINE IS CLEANING, water flows out of the dual spout several times. The dual spout and the pipes are cleaned. The procedure is interrupted, WATER FOR MILK SYSTEM CLEANING.
6 Maintenance T T ake out the old CLAR IS plus filter cartridge and the exten- sion. T Fit the extension onto a new filter cartridge. T Fit the filter cartridge into the water tank, pressing slightly, and push the cartridge holder back so that it audibly snaps into place.
Page 39
6 Maintenance E The descaling programme lasts approx. 45 minutes. E J UR A descaling tablets are available from stockists. E If you use a CLAR IS filter cartridge and this is activated, or the water hardness is set to ‘not active’, you will not be prompted to descale the machine.
6 Maintenance T R emove the water tank and rinse it. T Fill the water tank with fresh, cold water and reinsert. T Empty the three receptacles and place them under the dual spout, the steam pipe and the hot water pipe. % T Press the descaling button.
Page 41
6 Maintenance T Fill the water tank with fresh, cold water and reinsert.
7 Display messages 7 Display messages Message Cause/Result Action T Press the milk system The message R is displayed. A maintenance programme is cleaning button 6 to activate necessary. the maintenance status. R un the respective maintenance programme. The corresponding description is contained in section 6 ‘Maintenance’.
Page 43
7 Display messages Message Cause/Result Action T Clean and dry the metal DR IP TR AY MISSING The drip tray is not inserted correctly or is not inserted at contacts on the back of the drip all. Y ou cannot prepare any tray.
8 Troubleshooting 8 Troubleshooting Problem Cause/Result Action T Please contact your J UR A Grinder is making a very loud There are foreign objects in noise. the grinder. service partner (see Chapter ‘J UR A contact details / Legal information’). T R inse and clean the dual Insufficient foam is produced The dual spout is dirty.
Page 45
8 Troubleshooting Problem Cause/Result Action T Warm up the machine at ER R OR 2 or ER R OR 4 is If the machine was exposed to displayed. the cold for a long period of room temperature. time, heating is disabled for safety reasons.
9 Transport and environmentally neutral disposal 9 Transport and environmentally neutral disposal Transport / emptying Keep the packaging for your IMPR ESSA. It should be used to protect the system the machine during transportation. In order to protect the IMPR ESSA from frost during transportation, the system must be emptied.
1 0 Technical data 1 0 Technical data Voltage 220–240 V ~, 50 Hz Power CH: 1 500 W E U: 2200 W < 70 dB (A) Airborne noise emitted Marks of conformity Power consumption in standby mode 4.2 Wh Pump pressure 2x static max.
Index Index Environmentally neutral disposal 46 Espresso 22 Adjusting the grinder 1 6 Automatic switch-off 28 Filler funnel for cleaning tablet 4 Filling Bean container 1 2 Bean container 4 Film Cleaning 40 Multimedia 30 Filling 1 2 Filter cartridge Changing 37 Cappuccino 23 Inserting and activating 1 4...
Page 49
Index S witch-on time Timer 26 Permanent settings in programming mode S witching off (standby) 1 7 S witching on Power consumption Machine 1 7 Technical data 47 Power switch 4 Preparation Technical data 47 Cappuccino 23 Time and weekday 26 Espresso 22 Time format 29 Hot water 24...
IMPR ESSA X9 Win Platinum. Y our IMPR ESSA could incorporate minor changes. Feedback Y our opinion is important to us! Use the contact link at www.jura.com. Copyright The Instructions for Use contain information which is protected by copyright. It is not permitted to photocopy or translate these Instruc- tions for Use into another language without the express written con- sent of J UR A Elektroapparate AG.
Need help?
Do you have a question about the IMPRESSA X9 Win and is the answer not in the manual?
Questions and answers