Daily Operation; Switching On; Daily Maintenance - Jura GIGA X3c Professional Instructions For Use Manual

3 Daily operation

3 Daily operation

Switching on

Daily maintenance

22
When the GIGA is switched on, a rinse operation is automatically ini-
tiated. In programming mode you can change this setting so that
the machine prompts you to perform the switch-on rinse by press-
ing the Rotary Switch k (see Chapter 4 'Permanent settings in pro-
gramming mode – Maintenance settings').
Precondition: Your GIGA is switched on at the power switch.
T Place a receptacle under the dual spout.
Q T Press the On/Off button to switch the GIGA on.
'Welcome to JURA'
heats up.
'Machine is rinsing.', the machine rinses. Water flows out of
the dual spout. The operation stops automatically.
select product:'
To ensure that you get many years of reliable service out of your
GIGA and to guarantee the optimum coffee quality, the machine
requires daily maintenance.
T Pull out the drip tray.
T Empty the coffee grounds container and the drip tray. Rinse
them both with warm water.
E Always empty the coffee grounds container when the machine
is switched on. This is the only way of resetting the coffee
grounds counter.
T Refit the coffee grounds container and the drip tray.
T Remove the milk pipe and rinse it thoroughly under running
water.
T Dismantle and rinse the dual spout (see Chapter 5 'Mainte-
nance – Dismantling and rinsing the dual spout').
T Wipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfibre cloth).
appears on the display. The machine
appears on the display.
'Please