Renaming A Product - Jura GIGA X3c Professional Instructions For Use Manual

Renaming a product

g T Turn the Rotary Switch until the programme item
settings (2/5)'
T Press the 'Expert mode'
'Expert mode'
E Next select the button of the product for which you would like
to make settings. No product is prepared at this point.
E You can also select the products in the product selector. To do
this, turn the Rotary Switch to view the product selector.
T Press the 'Latte macchiato'
T Press the 'Amount of milk'
T Press the '+'
amount of milk to '6 sec.'.
T Press the 'Save'
T Press the 'Amount of milk foam'
T Press the '+'
amount of milk foam to '14 sec.'.
T Press the 'Save'
T Press the 'Volume'
T Press the '+'
volume to '40 ml'.
T Press the 'Save'
O T Press the P button to exit programming mode.
'Please select product:'
In the programme item
can rename all of the products.
Example: Proceed as follows to change the product name from
'Espresso' to 'My espresso'.
Precondition: 'Please select product:'
O T Press the P button.
'Maintenance status (1/5)'
g T Turn the Rotary Switch until the programme item
settings (2/5)'
T Press the 'Programming'
'Programming'
T Press the 'Espresso'
4 Permanent settings in programming mode
is displayed.
button.
button.
button.
or ' –' button to change the setting for the
button.
button.
or ' –' button to change the setting for the
button.
button.
or ' –' button to change the setting for the fill
button.
'Product settings (2/5)'
is displayed.
is displayed.
button.
button.
'Product
/ 'Programming' you
'Product
27