Preparing And Using For The First Time; Jura On The Internet; Requirements For First-Time Use; Setting Up The Machine - Jura GIGA X3c Professional Instructions For Use Manual

1 Preparing and using for the first time

1 Preparing and using for the first time

JURA on the Internet

Requirements for
first-time use

Setting up the machine

Filling the bean container

CAUTION
10
Visit us on the Internet. On the JURA website (www.jura.com) you
will find interesting and up-to-date information on your GIGA and
on every aspect of coffee.
A few preparations are necessary before the JURA service technician
can set up your GIGA in your home. The following preparations must
be carried out by a professionally qualified person:
U
The mains connection for the GIGA must be protected by a
residual current device (RCD).
U
There must be a power switch to disconnect the power supply
to the GIGA.
U
The permanent water connection must have a shut-off valve
with a non-return valve (type EA) and filter.
U
The permanent water connection must comply with the
specified technical data (see Chapter 9 'Technical data').
U
The drain hose must be connected to a siphon.
E These preparations must be carried out by a qualified person.
E The preparations must be carried out before the JURA service
technician sets up your GIGA in your home.
When setting up your GIGA, please note the following:
U
Place the GIGA on a horizontal surface that is not sensitive to
water.
U
Choose a spot for your GIGA which protects the machine
against overheating. Ensure that the ventilation slats are not
covered.
The bean container has an aroma preservation cover. This will ensure
that your coffee beans retain their aroma for longer.
Coffee beans which have been treated with additives (e.g. sugar),
ground coffee or freeze-dried coffee will damage the grinder.
T Only use roasted, untreated coffee beans to fill the bean con-
tainer.
T Remove the aroma preservation cover.