Jura GIGA X3c Professional Instructions For Use Manual page 42

5 Maintenance
42
T Remove the milk system from the dual spout.
T Remove the air intake pipe.
T Dismantle the milk system into its individual parts.
T Rinse all the parts under running water. If there are severely
dried-on milk residues, firstly immerse the individual parts
in a solution of 250 ml cold water and one capful of JURA
milk system cleaner. Then rinse the parts thoroughly.
T Reassemble the milk system. When doing this, note the
arrows (circled in red in the picture) on the individual parts.
T Fit the air intake pipe.