Adding Products To The Start Screen, Duplicating And Personalising - Jura Z6 Instructions For Use Manual

4 Permanent settings in programming mode
Adding products to the
start screen, duplicating
and personalising
26
T Turn the Rotary Switch to change the fill volume setting.
T Press the Rotary Switch to confirm the setting.
T Press the 'Save'
'Saved' appears briefly on the display.
'Expert mode'
T Press the ' 
the start screen again.
In the programme item
the products stored as standard in your Z6. You can move any of
these products to your preferred position on the start screen or in
the product selector and make it one of your favourites. You can
duplicate and personalise your favourite speciality coffees by giv-
ing them a new product name and individual settings (e.g. amount
and coffee strength).
Example: Proceed as follows to replace
start screen with 'Macchiato'.
Precondition: 'Please select product'
T Press the Rotary Switch.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Expert mode'
T Turn the Rotary Switch until
T Press the Rotary Switch to enter the programme item.
'Add to favourites'
T Press the Rotary Switch again.
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Select position'
T Press the 'Latte macchiato'
'Macchiato' /
T Press the 'Yes'
'Saved' appears briefly on the display.
'Product name'
E You can now give the product you just added a new name.
button.
/ 'Espresso'
button the number of times needed to display
'Product settings' /
is displayed.
'Product settings'
'Classics'
'Macchiato'
button.
'Do you want to replace the current product?'
button.
'Classics' you will find all
'Latte macchiato' on the
is displayed.
is displayed.
is in focus.