Language; Display Settings - Jura GIGA X3c Professional Instructions For Use Manual

4 Permanent settings in programming mode

Language

Display settings

36
T Press the 'Factory setting'
'Factory setting'
T Press the 'All products'
'All products' /
T Press the
'Yes'
'Saved' appears briefly on the display.
'Factory setting'
O T Press the P button to exit programming mode.
'Please select product:'
In this programme item you can set the language used by your GIGA.
Example: Proceed as follows to change the language from
to 'Deutsch'.
Precondition: 'Please select product:'
O T Press the P button.
'Maintenance status (1/5)'
g T Turn the Rotary Switch until the programme item
settings (4/5)'
T Press the 'Choose language'
'Choose language'
E To display more languages, press the
right).
T Press the 'Deutsch'
'Gespeichert'
'Geräteeinstellungen (4/5)'
O T Press the P button to exit programming mode.
'Bitte wählen Sie Ihr Produkt:'
In the programme item
make the following settings:
U
'Brightness' (as percentages)
U
'Contrast' (high, normal, low)
U
'Backlight' (backlighting; as percentages)
Example: Proceed as follows to change the brightness of the display.
Precondition: 'Please select product:'
O T Press the P button.
'Maintenance status (1/5)'
button.
button.
'Reset all products to the factory settings?'
button.
is displayed.
is displayed.
button.
button.
appears briefly on the display.
'Machine settings
is displayed.
'English'
'Machine
'Next' button (bottom
(4/5)' / 'Display' you can