Adding Products To The Start Screen, Duplicating And Personalising - Jura J600 Instructions For Use Manual

Adding products to the
start screen, duplicating
and personalising
T Turn the Rotary Switch to change the coffee strength set-
ting.
T Press the Rotary Switch to confirm the setting.
T Turn the Rotary Switch until the fill volume is in focus.
T Press the Rotary Switch.
T Turn the Rotary Switch to change the fill volume setting.
T Press the Rotary Switch to confirm the setting.
T Press the
'Save'
'Saved' appears briefly on the display.
'Expert mode'
T Press the P button to exit programming mode.
In the programme item
the products stored as standard in your JURA. You can move any of
these products to your preferred position on the start screen or in
the product selector and make it one of your favourites. You can
duplicate and personalise your favourite speciality coffees by giv-
ing them a new product name and individual settings (e.g. amount
and coffee strength).
Example: Proceed as follows to replace
start screen with 'Macchiato'.
T Press the P button.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Expert mode'
T Turn the Rotary Switch until
T Press the Rotary Switch to enter the programme item.
'Add to favourites'
T Press the Rotary Switch again.
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Select position'
T Press the
'Latte macchiato'
'Macchiato' / 'Do you want to replace the current product?'
T Press the 'Yes'
'Saved' appears briefly on the display.
'Product name'
4 Permanent settings in programming mode
button.
/ 'Espresso'
'Product settings' / 'Classics'
'Latte macchiato'
'Product settings'
'Classics'
'Macchiato'
button.
button.
you will find all
on the
is displayed.
is displayed.
is in focus.
25