Preparing Barista Recipes; Permanently Setting Amounts For The Cup Size - Jura GIGA X3c Professional Instructions For Use Manual

2 Preparation

Preparing barista recipes

Permanently setting
amounts for the cup size
20
All barista recipes are always prepared following the same model.
E The product selector view disappears automatically after
5 seconds if no preparation is started.
Example: Proceed as follows to prepare a White Cool.
Precondition: 'Please select product:'
g T Turn the Rotary Switch to view the product selector.
g T Turn the Rotary Switch until the
focus.
k T Press the Rotary Switch to start preparation.
T Follow the instructions on the display and confirm by press-
ing the 'Next'
E You can stop preparation at any time by pressing the
ton.
E You cannot make any permanent settings for barista recipes.
During preparation, you can however change the coffee
strength and quantities by turning the Rotary Switch f.
It is easy to make permanent settings for the amounts (amount of
water, amount of milk etc.) according to the cup size for all products
except caffè latte. Adjust the amount once as shown in the following
example. Every time you prepare a drink in the future, this amount
will be dispensed.
The permanent settings for adapting the amounts to the cup size
for all products always follows the same model.
Example: Proceed as follows to permanently set the amount of
water for one coffee.
Precondition: 'Please select product:'
T Place a cup under the dual spout.
T Press and hold the
'Coffee' and the fill volume are displayed.
T Hold the
'Coffee'
button.' appears.
T Release the 'Coffee'
Preparation starts and the coffee flows into the cup.
is displayed.
'White Cool'
button.
is displayed.
'Coffee' button.
button down until
button.
product is in
'' but-
'Enough coffee? Press