Table of Contents
Advertisement
4 Permanent settings in programming mode
Adding products to the
start screen
28
g T Turn the Rotary Switch to change the setting for the amount
of milk to '20 sec.'.
T Press the
'Save'
'Saved'
appears briefly on the display.
T Press the
'Next'
T Press the
'Interval'
g T Turn the Rotary Switch to change the setting for the interval
to '40 sec.'.
T Press the
'Save'
'Saved'
appears briefly on the display.
T Press the
'Next'
T Press the
'Volume'
g T Turn the Rotary Switch to change the setting for the amount
of water to '40 ml'.
T Press the
'Save'
'Saved'
appears briefly on the display.
'Latte macchiato'
O T Press the P button to exit programming mode.
'Please select product:'
In the programme item
will find all the products stored as standard in your IMPRESSA. You
can move any of these products to your preferred position on the
start screen and make it one of your favourites.
You can also change the products shown in the product selector. To
do this, go to the programme item
gramming'
and press the
delete a product or products. In the programme item
tings (3/7)' / 'Classic-library', press the
ton to add a product or products again.
Example: The
'2 espressi'
corner of the start screen.
Precondition: 'Please select product:'
O T Press the P button.
'Maintenance status (1/7)'
g T Turn the Rotary Switch until the programme item
settings (3/7)'
button.
button.
button.
button.
button.
button.
button.
'Product
settings (3/7)' /
'Product
'Remove from product selector'
'Add to product selector'
product appears in the bottom right-hand
is displayed.
is displayed.
'Classic-library'
you
settings (3/7)' /
'Pro-
button to
'Product set-
but-
'Product
Advertisement
Table of Contents
