Cleaning The Machine - Jura GIGA X3c Professional Instructions For Use Manual

5 Maintenance

Cleaning the machine

CAUTION
44
O T Press the P button.
'Maintenance status (1/5)'
T Press the 'Change the filter'
'Change the
capacity?'
T Press the 'Yes'
'Change the filter' /
'Please select product:'
After 220 preparations or 80 switch-on rinses, the GIGA will prompt
you to clean it.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E The cleaning programme lasts approximately 20 minutes.
E Do not interrupt the cleaning programme. The quality of
cleaning will be impaired if you do so.
E JURA cleaning tablets are available from specialised dealers.
Example: Proceed as follows to clean when prompted to do so.
Precondition: 'Clean machine.'
O T Press the P button.
'Maintenance status (1/5)'
T Press the 'Clean'
T Press the 'Start'
T Press the 'Start'
'Empty coffee grounds container.'
T Empty the drip tray and coffee grounds container and put
them back into the machine.
'Press the Rotary Switch.'
T Place a receptacle under the dual spout.
k T Press the Rotary Switch.
'Machine is being
spout.
The operation is interrupted,
T Open the cover of the filler funnel for ground coffee.
button.
filter' / 'Do you really want to reset the filter
button
'Filter capacity has been reset.'
appears on the display.
and the symbol c are displayed.
button.
button.
button again.
cleaned.', water flows out of the dual
'Add cleaning tablet.'.