Jura GIGA X3c Professional Instructions For Use Manual page 26

4 Permanent settings in programming mode
Product
2 cappuccini,
2 caffè latte,
2 espressi
macchiati,
2 latte macchiati,
2 flat whites
Caffè latte*
Portion of milk
foam,
Portion of milk*
2 portions of milk
foam,
2 portions of milk
Pot,
Pot 2
Hot water*
26
Coffee strength
–
; (extra-mild),
;; (mild),
;;; (normal),
;;;; (strong),
;;;;; (extra-strong)
–
–
; (extra-mild),
;; (mild),
;;; (normal),
;;;; (strong),
;;;;; (extra-strong)
–
(Products marked * are also available in 'large' size.)
E In addition to the settings listed, you can reset the values for
all products to the factory settings.
Example: Proceed as follows in the
amount of milk for a latte macchiato from
amount of milk foam from
water from
Precondition: 'Please select product:'
O T Press the P button.
'Maintenance status (1/5)'
Amount
Amount of coffee:
25 ml – 290 ml
Milk: 0 sec. – 120 sec.
Milk foam: 0 sec. – 120 sec.
(per cup)
Interval: 0 sec. – 120 sec.
Amount of coffee:
25 ml – 290 ml
Milk: 0 sec. – 120 sec.
Milk foam: 0 sec. – 120 sec.
Milk: 0 sec. – 120 sec.
Milk foam: 0 sec. – 120 sec.
Milk: 0 sec. – 120 sec.
Milk foam: 0 sec. – 120 sec.
(per cup)
Amount of coffee:
25 ml – 290 ml
(per stroke)
Water: 25 ml – 450 ml
'12 sec.'
'45 ml' to '40 ml'.
More settings
Temperature (low,
normal, high),
Product name
Temperature (low,
normal, high),
Product name
Product name
Product name
Temperature (low,
normal, high),
Number of strokes (1–5;
set number is displayed
during preparation),
Product name
Temperature (low,
normal, high),
Product name
'Expert mode' to change the
'4 sec.' to '6 sec.', the
to '14 sec.' and the amount of
is displayed.