Descaling The Machine - Jura GIGA X3c Professional Instructions For Use Manual

Descaling the machine

J
CAUTION
CAUTION
CAUTION
CAUTION
T Insert a JURA cleaning tablet into the filler funnel.
T Close the cover of the filler funnel.
'Press the Rotary Switch.'
k T Press the Rotary Switch.
'Machine is being
repeatedly.
The operation is interrupted,
ner.'.
T Empty the drip tray and coffee grounds container and put
them back into the machine.
'Clean' / 'Cleaning complete.'
Cleaning is now complete. Your GIGA is once more ready for
use.
The GIGA builds up deposits of limescale over time and automati-
cally prompts you to descale it when necessary. The degree of calci-
fication depends on the hardness of your water.
E If you use an external CLARIS filter cartridge and this is acti-
vated, you will not be prompted to descale.
If the descaling agent comes into contact with the skin or eyes, this
can cause irritation.
T Avoid contact with the skin or eyes.
T Rinse off the descaling agent with clean water. Should you get
any descaling agent in your eye, see a doctor.
If the wrong descaling agent is used, the machine could be dam-
aged and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
If the descaling operation is interrupted, there may be damage to
the machine.
T Allow the descaling programme to run to the end.
If the descaling agent comes into contact with sensitive surfaces
(e.g. marble), damage cannot be ruled out.
T Clean up any splashes immediately.
E The descaling programme lasts approximately 50 minutes.
cleaned.', water flows out of the dual spout
'Empty coffee grounds contai-
5 Maintenance
45