Provision ISR Z-22IR User Manual page 21

<SHUTTER>: Choosing between Auto and Manual

<WB MODE >: White Balance is normally compensated for by the

automatic white balance gain control. In some lighting conditions, user
may want to manually adjust the red and blue settings for optimal
viewing. There are 6 options:
[AUTO]: Auto White Balance (default setting).

[MANUAL]: Manually set the red and blue values, setup from 000 to

255.
[ATW]: Auto track White Balance.

[OPW]: Once touch White Balance

[OUTDOOR]: Suitable for outdoor use.

[INDOOR]: Suitable for indoor use.

<AGC>: changing the value of AGC

<DNR>: Turning digital noise reduction on/off

<BACKLIGHT>: switching between OFF/BLC/HLC.

<HLC LEVEL>: after choosing HLC in the backlight menu, you can change

level of HLC effect.
<MIRROR>: Turning Mirror effect ON/OFF

<BRIGHTNESS>: Changing the brightness value.

<SHARPNESS>: Changing the sharpness value.

<MASK SETTINGS>: This mask setting it referring to the zoom module

only and will not be effective in a PTZ.
<COLOR>: Adjusting color levels

20