Provision ISR Z-22IR User Manual page 14

4.3.3 DISPLAY BOOT-UP INFO
PROTOCOL: PELCO P D
BAUD RATE: 2400BPS
CAMERA ID: 001
CAMERA S/N: 0000000001
MODEL: -----------------
VERSION: V1.02
FAN SPEED: 6000RPM
CALL PRESET 1 TO BACK
<Main Menu><SYSTEM><DISPLAY BOOT-UP INFO>
Enter into Boot-up info displays to check current setup, call preset 1 to return
to upper menu
4.3.4 PASSWORD
<Main Menu><SYSTEM><PASSWORD>
<INPUT PASSWORD > (Factory default is 123456):

Use the joystick to enter submenu, then input the old password. If you forget
the password after changing, please contact Provision-ISR support for
recovery password.
The cursor will flash if the old password is correct, and then input the new
INPUT PASSWORD:
CONFIRM:
PSWD PROTECTION:
BACK
EXIT
13
******
******
OFF