Router Ospf; Router-Id - Edge-Core ES4625 Management Manual

Table 4-89 Open Shortest Path First Commands (Continued)
Command
show ip ospf neighbor
show ip ospf
summary-address
show ip ospf virtual-links Displays parameters and the adjacency state of virtual links

router ospf

This command enables Open Shortest Path First (OSPF) routing for all IP interfaces
on the router. Use the no form to disable it.
Syntax
[no] router ospf
Command Mode
Global Configuration
Default Setting
Disabled
Command Usage
• OSPF is used to specify how routers exchange routing table information.
• This command is also used to enter router configuration mode.
Example
Console(config)#router ospf
Console(config-router)#
Related Commands
network area (4-271)

router-id

This command assigns a unique router ID for this device within the autonomous
system. Use the no form to use the default router identification method (i.e., the
lowest interface address).
Syntax
router-id ip-address
no router-id
ip-address - Router ID formatted as an IP address.
Command Mode
Router Configuration
Default Setting
Lowest interface address
Function
Displays neighbor information
Displays all summary address redistribution information
IP Routing Commands
Mode Page
PE
PE
PE
4
4-293
4-294
4-294
4-265