Dvmrp Multicast Routing Commands; Table 4-106 Dvmrp Multicast Routing Commands; Router Dvmrp - Edge-Core ES4625 Management Manual

DVMRP Multicast Routing Commands

Command

router dvmrp

probe-interval
nbr-timeout
report-interval
flash-update-interval
prune-lifetime
default-gateway
ip dvmrp
ip dvmrp metric
clear ip dvmrp route
show router dvmrp
show ip dvmrp route
show ip dvmrp neighbor
show ip dvmrp interface
router dvmrp
This command enables Distance-Vector Multicast Routing (DVMRP) globally for the
router and to enter router configuration mode. Use the no form to disable DVMRP
multicast routing.
Syntax
[no] router dvmrp
Command Mode
Global Configuration
Command Usage
This command enables DVMRP globally for the router and enters router
configuration mode. Make any changes necessary to the global DVMRP
parameters. Then specify the interfaces that will support DVMRP multicast
routing using the ip dvmrp command, and set the metric for each interface.

Table 4-106 DVMRP Multicast Routing Commands

Function
Enables DVMRP and enters router configuration mode
Sets the interval for sending neighbor probe messages
Sets the delay before declaring an attached neighbor
router down
Sets the interval for propagating the complete set of routing
tables to other neighbor routers
Sets the interval for sending updates about changes to
network topology
Defines how long a prune state remains in effect for a
source-routed multicast tree
Configures the default gateway for IP multicast routing
Enables DVMRP on the specified interface
Sets the metric used when establishing reverse paths to
some networks on directly attached interfaces
Clears all dynamic routes in the multicast routing table
Displays global DVMRP configuration settings
Displays DVMRP routing information
Displays DVMRP neighbor information
Displays DVMRP configuration settings for the interfaces
Multicast Routing Commands
4
Mode Page
GC 4-299
RC 4-300
RC 4-301
RC 4-301
RC 4-302
RC 4-302
RC 4-303
IC 4-303
IC 4-304
PE 4-305
NE, PE 4-305
NE, PE 4-306
NE, PE 4-307
NE, PE 4-307
4-299