Multicast Routing Commands; Static Multicast Routing Commands; Table 4-102 Multicast Routing Commands; Table 4-103 Static Multicast Routing Commands - Edge-Core ES4625 Management Manual

Microsoft gigabit ethernet stackable layer 3 switch managment guide
Hide thumbs Also See for ES4625:
Table of Contents

Advertisement

Multicast Routing Commands

This router uses IGMP snooping and query to determine the ports connected to
downstream multicast hosts, and to propagate this information back up through the
multicast tree to ensure that requested services are forwarded through each
intermediate node between the multicast server and its hosts, and also to filter traffic
from all of the other interfaces that do not require these services.
Multicast routers use snooping and query messages, along with a multicast routing
protocol to deliver IP multicast packets across different subnetworks. This router
supports both the Distance-Vector Multicast Routing Protocol (DVMRP) and
Protocol Independent Multicasting (PIM). (Note that you should enable IGMP for any
interface that is using multicast routing.)
Command Groups
Static Multicast Routing
General Multicast Routing
DVMRP Multicast Routing
PIM-DM Multicast Routing

Static Multicast Routing Commands

Command
ip igmp snooping vlan
mrouter
show ip igmp snooping
mrouter

ip igmp snooping vlan mrouter

This command statically configures a multicast router port. Use the no form to
remove the configuration.
Syntax
[no] ip igmp snooping vlan vlan-id mrouter interface
• vlan-id - VLAN ID (Range: 1-4093)
• interface
• ethernet unit/port
- unit - Stack unit. (Range: 1-8)
- port - Port number. (Range: 1-25/49)
• port-channel channel-id (Range: 1-32)

Table 4-102 Multicast Routing Commands

Function
Configures static multicast router ports
Enables IP multicast routing globally; also displays the IP multicast
routing table created from static and dynamic routing information
Configures global and interface settings for DVMRP
Configures global and interface settings for PIM-DM

Table 4-103 Static Multicast Routing Commands

Function
Adds a multicast router port
Shows multicast router ports
Multicast Routing Commands
4
Page
4-295
4-297
4-299
4-308
Mode
Page
GC
4-295
PE
4-296
4-295

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Es4649

Table of Contents