Whichboot; Table 4-26 File Directory Information - Edge-Core ES4625 Management Manual

4
Command Line Interface
Command Usage
• If you enter the command dir without any parameters, the system displays all
files.
• A colon (:) is required after the specified unit number.
• File information is shown below:
Column Heading
file name
file type
startup
size
Example
The following example shows how to display all file information:
Console#dir
file name
-------------------------------------
Unit1:
D1014
V1000-F
V31121
Factory_Default_Config.cfg
startup1.cfg
---------------------------------------------------------------------------
Console#

whichboot

This command displays which files were booted when the system powered up.
Syntax
whichboot [unit]
unit - Stack unit. (Range: 1-8)
Default Setting
None
Command Mode
Privileged Exec
4-68

Table 4-26 File Directory Information

Description
The name of the file.
File types: Boot-Rom, Operation Code, and Config file.
Shows if this file is used when the system is started.
The length of the file in bytes.
file type
--------------
Boot-Rom Image
Operation Code
Operation Code
Config File
Config File
startup size (byte)
------- -----------
Y
N
Y
N
Y
Total free space:
825336
3504992
4951408
455
7996
22675456