Edge-Core ES4625 Management Manual page 414

4
Command Line Interface
- Max Count
- Port-control
- Supplicant
- Current Identifier
• Authenticator State Machine
- State
- Reauth Count
• Backend State Machine
- State
- Request Count
- Identifier(Server)
• Reauthentication State Machine
- State
Example
Console#show dot1x
Global 802.1X Parameters
system-auth-control: enable
802.1X Port Summary
Port Name Status
1/1 disabled
1/2 disabled
. .
.
1/25 disabled
1/26 enabled
802.1X Port Details
802.1X is enabled on port 1/1
. .
.
4-86
– The maximum number of hosts allowed to
access this port (page 4-82).
– Shows the dot1x mode on a port as auto,
force-authorized, or force-unauthorized
(page 4-81).
– MAC address of authorized client.
– The integer (0-255) used by the Authenticator to
identify the current authentication session.
– Current state (including initialize, disconnected,
connecting, authenticating, authenticated,
aborting, held, force_authorized,
force_unauthorized).
– Number of times connecting state is re-entered.
– Current state (including request, response,
success, fail, timeout, idle, initialize).
– Number of EAP Request packets sent to the
Supplicant without receiving a response.
– Identifier carried in the most recent EAP
Success, Failure or Request packet received
from the Authentication Server.
– Current state (including initialize, reauthenticate).
Operation Mode
Single-Host
Single-Host
Single-Host
Single-Host
Mode
ForceAuthorized
ForceAuthorized
ForceAuthorized
Auto
Authorized
n/a
n/a
yes
yes