Ip Routing Commands; Global Routing Configuration; Ip Routing; Table 4-78 Ip Routing Commands - Edge-Core ES4612 Management Manual

4
Command Line Interface

IP Routing Commands

After you configure network interfaces for this router, you must set the paths used to
send traffic between different interfaces. If you enable routing on this device, traffic
will automatically be forwarded between all of the local subnetworks. However, to
forward traffic to devices on other subnetworks, you can either configure fixed paths
with static routing commands, or enable a dynamic routing protocol that exchanges
information with other routers on the network to automatically determine the best
path to any subnetwork.
This section includes commands for both static and dynamic routing. These
commands are used to connect between different local subnetworks or to connect
the router to the enterprise network.
Command Group
Global Routing
Configuration
Routing Information
Protocol (RIP)
Open Shortest Path First
(OSPF)

Global Routing Configuration

Command

ip routing

ip route
clear ip route
show ip route
show ip host-route
show ip traffic
ip routing
This command enables IP routing. Use the no form to disable IP routing.
Syntax
[no] ip routing
Default Setting
Enabled
Command Mode
Global Configuration
4-244

Table 4-78 IP Routing Commands

Function
Configures global parameters for static and dynamic routing, displays the
routing table, and statistics for protocols used to exchange routing
information
Configures global and interface specific parameters for RIP
Configures global and interface specific parameters for OSPF

Table 4-79 Global Routing Configuration Commands

Function
Enables static and dynamic IP routing
Configures static routes
Deletes specified entries from the routing table
Displays specified entries in the routing table
Displays displays the interface associated with known routes
Displays statistics for IP, ICMP, UDP, TCP and ARP protocols
Page
4-244
4-248
4-259
Mode Page
GC 4-244
GC 4-245
PE 4-246
PE 4-246
PE 4-247
PE 4-248