Edge-Core ES4612 Management Manual page 167

CLI – This displays STA settings for instance 1, followed by settings for each port.
Console#show spanning-tree mst 2
Spanning-tree information
---------------------------------------------------------------
Spanning tree mode
Spanning tree enable/disable
Instance
Vlans configuration
Priority
Bridge Hello Time (sec.)
Bridge Max Age (sec.)
Bridge Forward Delay (sec.)
Root Hello Time (sec.)
Root Max Age (sec.)
Root Forward Delay (sec.)
Max hops
Remaining hops
Designated Root
Current root port
Current root cost
Number of topology changes
Last topology changes time (sec.):646
Transmission limit
Path Cost Method
---------------------------------------------------------------
Eth 1/ 7 information
---------------------------------------------------------------
Admin status
Role
State
External path cost
Internal path cost
Priority
Designated cost
Designated port
Designated root
Designated bridge
Fast forwarding
Forward transitions
Admin edge port
Oper edge port
Admin Link type
Oper Link type
Spanning Tree Status : enable
. .
.
CLI – This example sets the priority for MSTI 1, and adds VLANs 1-5 to this MSTI.
Console(config)#spanning-tree mst-configuration
Console(config-mst)#mst 1 priority 4096
Console(config-mstp)#mst 1 vlan 1-5
Console(config-mst)#
Spanning Tree Algorithm Configuration
:MSTP
:enable
:2
:2
:4096
:2
:20
:15
:2
:20
:15
:20
:20
:4096.2.0000E9313131
:0
:0
:0
:3
:long
: enable
: disable
: discarding
: 10000
: 10000
: 128
: 0
: 128.7
: 4096.2.0000E9313131
: 4096.2.0000E9313131
: enable
: 0
: enable
: enable
: auto
: point-to-point
3
4-186
4-175
4-177
4-176
3-119