Clear Ip Dvmrp Route; Show Router Dvmrp - Edge-Core ES4612 Management Manual

Example
Console(config)#interface vlan 1
Console(config-if)#ip dvmrp metric 2
Console(config-if)#

clear ip dvmrp route

This command clears all dynamic routes learned by DVMRP.
Command Mode
Privileged Exec
Example
As shown below, this command clears everything from the route table except for the
default route.
Console#clear ip dvmrp route
clear all ip dvmrp route
Console#show ip dvmrp route
Source
--------------- --------------- --------------- --------- ------ ------ ------
10.1.0.0
Console#

show router dvmrp

This command displays the global DVMRP configuration settings.
Command Mode
Normal Exec, Privileged Exec
Command Usage
This command displays the global DVMRP settings described in the
preceding pages:
• Admin Status, router dvmrp, (page 4-295)
• Probe Interval (page 4-296)
• Nbr Expire (page 4-297)
• Minimum Flash Update Interval (page 4-298)
• Prune Lifetime (page 4-298)
• Route Report (page 4-297
• Default Gateway (page 4-299)
• Metric of Default Gateway (page 4-300)
Mask Upstream_nbr
255.255.255.0
Multicast Routing Commands
Interface Metric UpTime Expire
10.1.0.253 vlan1
4
1 1840 0
4-301