Show Standby; Table 4-112 Show Standby - Display Description - Edge-Core ES4612 Management Manual

Gigabit ethernet switch
Table of Contents

Advertisement

show standby

This command displays status information for HSRP.
Syntax
show standby [active | init | listen | standby] [brief]
• active - Displays HSRP groups in the active state.
• init - Displays HSRP groups in the initial state.
• listen - Displays HSRP groups in the listen or learn state.
• standby - Displays HSRP groups in the standby or speak state.
• brief - Displays summary information for all HSRP groups on this router.
Defaults
Displays detailed information for each group.
Command Mode
Privileged Exec
Example
This example displays the full listing of status information for all groups.
Console#show standby
Vlan 1 - Group 1
Local State is Active, priority 5 (confgd 10), may preempt
Preemption delayed for 10 secs
Hellotime 6 sec, holdtime 18 sec
Next hello sent in 0: 0: 5
Host standby IP address is 192.168.1.7 configured
Active router is local
Standby router is unknown
Standby virtual mac address is
Authentication text "bluebird"
Tracking interface states for 1 interfaces, 0 up
Down
Vlan2
Console#
Field
Description
Local state
State of the local router:
• Active - Current master router.
• Standby - Designated backup router next in line to take over as the master router.
• Speak - Router is sending packets to claim the master or standby role.
• Init - Router is not ready to participate in HSRP. A router may be in this state because
the associated interface is not up, the interface is in an HSRP group on other routers
in the network that were learned via snooping, or a local group has been configured
without a specified IP interface.
• Listen - Router is not in the active nor standby state. If no messages are received from
the active or standby router, it will start to speak.
• Learn - Router is not in the active nor standby state, nor does it have enough
information to attempt to claim the master or standby roles.
0- 0- C- 7-AC- 1
5

Table 4-112 show standby - display description

Router Redundancy Commands
4
4-327

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents