Line Commands; Table 4-5 Line Commands - Edge-Core ES4612 Management Manual

Command Group
Multicast Routing
Router Redundancy
The access mode shown in the following tables is indicated by these abbreviations:
NE (Normal Exec)
PE (Privileged Exec)
GC (Global Configuration)
LC (Line Configuration)
IC (Interface Configuration)

Line Commands

You can access the onboard configuration program by attaching a VT100
compatible device to the server's serial port. These commands are used to set
communication parameters for the serial port or Telnet (i.e., a virtual terminal).
Command Function
line Identifies a specific line for configuration and starts the line
configuration mode
login Enables password checking at login
password Specifies a password on a line
timeout login Sets the interval that the system waits for a login attempt
response
exec-timeout Sets the interval that the command interpreter waits until user
input is detected
password-thresh Sets the password intrusion threshold, which limits the number of
failed logon attempts
Sets the amount of time the management console is inaccessible
a
silent-time
after the number of unsuccessful logon attempts exceeds the
threshold set by the password-thresh command
Sets the number of data bits per character that are interpreted and
a
databits
generated by hardware
Defines the generation of a parity bit
a
parity
Sets the terminal baud rate
a
speed
Sets the number of the stop bits transmitted per byte
a
stopbits
disconnect Terminates a line connection
show line Displays a terminal line's parameters
a These commands only apply to the serial port.
Table 4-4 Command Group Index (Continued)
Description
Configures multicast routing protocols DVMRP and PIM-DM
Configures router redundancy to create primary and backup routers
VC (VLAN Database Configuration)
MST (Multiple Spanning Tree)
ACL (Access Control List Configuration)
DC (DHCP Server Configuration)
RC (Router Configuration)

Table 4-5 Line Commands

4
Line Commands
Page
4-291
4-311
Mode Page
GC 4-12
LC 4-12
LC 4-13
LC 4-14
LC 4-15
LC 4-15
LC 4-16
LC 4-17
LC 4-17
LC 4-18
LC 4-18
PE 4-19
NE, PE 4-19
4-11