Figure 3-11 Deleting Files - Edge-Core ES4612 Management Manual

To delete a file select System, File, Delete. Select the file name from the given list by
checking the tick box and click Apply. Note that t
startup code cannot be deleted.
CLI – To download new firmware form a TFTP server, enter the IP address of the
TFTP server, select "config" as the file type, then enter the source and destination
file names. When the file has finished downloading, set the new file to start up the
system, and then restart the switch.
To start the new firmware, enter the "reload" command or reboot the system
Console#copy tftp file
TFTP server ip address: 10.1.0.19
Choose file type:
1. config: 2. opcode: <1-2>: 2
Source file name: V1025.bix
Destination file name: V1025
\Write to FLASH Programming.
-Write to FLASH finish.
Success.
Console#config
Console(config)#boot system opcode:V1025
Console(config)#exit
Console#reload
he file currently designated as the

Figure 3-11 Deleting Files

Basic Configuration
4-64
4-69
4-23
3
3-21