Show System - Edge-Core ES4612 Management Manual

show system

This command displays system information.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
• For a description of the items shown by this command, refer to "Displaying
System Information" on page 3-11.
• The POST results should all display "PASS." If any POST test indicates
"FAIL," contact your distributor for assistance.
Example
Console#show system
System description: 8 SFP ports + 4 Gigabit Combo ports L2/L3/L4 managed
System OID string: 1.3.6.1.4.1.259.6.10.57
System information
System Up time: 0 days, 1 hours, 23 minutes, and 44.61 seconds
System Name
System Location
System Contact
MAC address
Web server
Web server port
Web secure server
Web secure server port : 443
Telnet server
Telnet port
Jumbo Frame
POST result
DUMMY Test 1.................PASS
UART LOOP BACK Test..........PASS
DRAM Test....................PASS
Timer Test...................PASS
PCI Device 1 Test............PASS
Switch Int Loopback test.....PASS
Done All Pass.Port 12 link-up notification.
Console#
standalone switch
: [NONE]
: [NONE]
: [NONE]
: 00-30-f1-47-58-3a
: enable
: 80
: enable
: enable
: 23
: Disabled
System Management Commands
4
4-61