Table of Contents
Advertisement
Location
Fronts and Trims
For fronts and trims dimensions, refer to instructions
provided with each kit.
Floor/Hearth
This appliance is approved for installation directly on
combustible material such as plywood and so on. Vinyl,
carpet, and soft fl ooring require sheet metal extending
the whole width and depth under the appliance.
This appliance does not require a hearth. Combustible
fl ooring may extend up to the front of the unit.
NOTE
The surround backing plates for this appliance
require a MINIMUM space of 1/2" (13 mm)
between their bottom edge and the surface of
the finished floor/hearth in front for air flow.
Raise the appliance accordingly.
46" (1168 mm) min.
Corner Installation
MINIMUM 3/4" (19 mm)
clearance to
combustible
at rear
9
Advertisement
Table of Contents
