Troubleshooting - MK Diamond Products MK-212 SERIES Owner's Manual & Operating Instructions

MK-212 SAW
(G)
Adjust the Guide Rail until it
is aligned both vertically and
horizontally

TROUBLESHOOTING

Blade will not cut properly
(A)
Check for Smoothness or
"Glazing" (Dress blade if
needed)
(D)
Verify the blade is correct for
the material being used.
(H)
Tighten the four Guide Rail
Adjusting Screws using a
1/2-inch socket
(B)
Check for proper rotation
32
MAINTENANCE
(C)
Ensure the Blade Core is not
bent and Arbor is not out of
round