MK Diamond Products MK-212 SERIES Owner's Manual & Operating Instructions page 31

MK-212 SAW
(G)
Reinstall all components
removed in steps A through E
CUTTING HEAD ALIGNMENT
NOTE: The alignment of the Cutting Head should be checked periodically to ensure the accuracy of the cut.
(A)
Remove the Blade Guard
(D)
Pivot the Beam and retighten
the two Pivot Knobs
(B)
Using a combination square,
check the Blade for vertical
alignment
(E)
Using a combination square,
check the Blade for 45°
alignment
31
MAINTENANCE
(C)
Loosen the two Beam Post
Cutting Head Pivot Knobs
located on each end of the saw
(F)
Loosen the four Guide Rail
Adjusting Screws using a
1/2-inch socket