MK Diamond Products MK-212 SERIES Owner's Manual & Operating Instructions page 15

MK-212 SAW
ASSEMBLY
Follow the assembly instructions to prepare your MK-212 for operation.
SUPPORT LEG INSTALLATION
(A)
Loosen the Cutting Head
Transverse Knob
(D)
Obtain the first Leg
(G)
Repeat Steps D through F
for the second Leg
(B)
Move the Cutting Head to
one end of the saw
(E)
Lift the saw; align the Leg with
the Retaining Slot on the saw
and the install the Leg
(H)
Loosen the Cutting Head
Transverse Knob
15
ASSEMBLY
(C)
Tighten the Cutting Head
Transverse Knob
(F)
Tighten the Leg Retaining
Wingnut
(I)
Move the Cutting Head
to the end with the two
installed Legs