Product Specifications - MK Diamond Products MK-212 SERIES Owner's Manual & Operating Instructions

MK-212 SAW

PRODUCT SPECIFICATIONS

The MK-212 is a versatile Tile and Stone Saw. Operated and used according to this manual, the MK-212 will
provide years of dependable service.
GENERAL DESCRIPTION
The MK-212 Tile Saw is engineered as a stand mounted wet tile and stone saw. The saw includes a powerful
115v direct drive AC motor.
MOTOR SPECIFICATIONS
Motor specifications for the MK-212 are listed in Table 2 below.
THERMAL OVERLOAD PROTECTION
The motor is protected by a thermal overload equipped with a manual reset.
BLADE CAPACITY
The MK-212 uses a ten (10) inch (254 mm) diameter wet cutting continuous rim MK Diamond blade.
TILE TYPES
The MK-212 can cut a variety of tile types including Porcelain, Terra Cotta, Marble, Quarry and Slate, or almost
any other non-ferrous material.
NOTE: The MK-212 is not designed to cut plastic or ferrous (metals) material.
MK-212-4
Horse Power
Voltage
Overall Amperage
Frequency
RPM
Weight
Table 2
13
PRODUCT SPECIFICATIONS
MK-212-6
2 hp 2 hp
120v 120v
14.4 14.4 a / 6.7 a
60 60
3400 3400
226 lbs 270 lbs