MK-212 SAW
(G)
Loosen the Blade Retaining
Nut
NOTE: T he Diamond Blade will have to be installed onto the MK-212 with the Directional Arrow toward
the motor side of the Cutting Head for the blade to be seated correctly.
(J)
Install Diamond Blade onto
Blade Shaft
(M)
Install the Blade Retaining Nut
(H)
Remove the Blade Retaining
Nut
(K)
Verify the Directional Arrow
of the Blade matches the
Directional Arrow of the Blade
Guard
(N)
Verify the Blade Retaining Nut
is seated in the Outer Flange
17
ASSEMBLY
(I)
Remove the Outer Flange
(L)
Install the Outer Flange
(O)
Tighten the Blade Retaining
Nut