Hazard Symbols - MK Diamond Products MK-212 SERIES Owner's Manual & Operating Instructions

MK-212 SAW
Potential hazards associated with the MK-212 saw operation will be referenced with Hazard Symbols which
appear throughout this manual, and will be referenced in conjunction with Safety Message/Alert Symbols.

HAZARD SYMBOLS

ALWAYS read this Owner's Manual before operating the machine.
ALWAYS avoid inhalation of and skin contact with silica dust and/or mist.
ON / OFF
ALWAYS place the power ON/OFF switch in the OFF position when the machine is not in use.
ALWAYS wear approved eye protection.
ALWAYS wear approved respiratory protection.
NEVER operate equipment with covers, or guards removed. Keep fingers, hands, hair and
clothing away from all moving parts to prevent injury.
ALWAYS use caution around gears. Keep fingers, hands, hair and clothing away from all moving
parts to prevent injury.
NEVER touch the power cord with wet hands or while standing in water when it is connected
to a power source.
NEVER operate the machine in an explosive atmosphere or near combustible materials.
5
SAFETY